User programmable arbitrary waveform output, Arbitrary waveform generator – B&K Precision 2542B-GEN - Manual User Manual
Page 160

Arbitrary Waveform Generator
160
User Programmable Arbitrary Waveform Output
Press the Output Type softkey to select User ARB waveform,
ARB menu page 1/2 will be displayed.
Softkey
Description
Output
Type
Press Output Type to select a
standard waveform or modulated
signal to output
Freq
Press this softkey to toggle
selection between frequency and
period parameter. Use the left or
right keys below the adjustment
knob
to
change cursor
selection (selection will be in red
color) and rotate the adjustment
knob to change the value of the
selected digit. When a unit is
selected (i.e. Hz, kHz, MHz),
rotating the knob will change the
parameter upward or downward by
x10. Units will automatically
change accordingly.
Ampl
Press Ampl to select and change
the amplitude parameter.