Quick start guide – B&K Precision 2542B-GEN - Manual User Manual
Page 208

Quick Start Guide
208
Perform the following steps to output the amplitude
modulated waveform.
Connect the WG Output teminal to CH1 terminal.
Press ON/OFF key to enable signal output.
Press the MENU key to display the arbitrary waveform
generator menu.
Press Output Type softkey to select AM modulation.
Press Carrier Freq softkey to select and specify the
carrier frequency to 10 kHz.
Press Carrier Ampl softkey to select and specify the
carrier amplitude to 600 mVpp.
Press More 1/2 softkey to display the AM menu page
2/2.
This manual is related to the following products: