Extron Electronics MKP 3000 Series - Manual (Page 30)

MKP 3000 Series • Local Operation
Local Operation, cont’d
MKP 3000 Series
4
Chapter Four
SIS ™ Operation
RS-232 Links
Ethernet Link
Host-to-MKP Instructions
MKP-Initiated (Unsolicited) Messages
MKP Error Responses
Using the Command/Response Table
3-20
MKP 10 MAAP and MKP 3000 L Keypad
Operation
When the connected switcher has a large matrix size (up to 128
inputs by 128 outputs), selecting an input or output number by
rotating the Select knob can be inconvenient. The optional
MKP 10 MAAP keypad (figure 3-11) and the built-in
MKP 3000 L keypad allow rapid input/output selection.
BACK CANCEL
1 2 3
4 5 6
7 8 9
0
MKP 10
2 4
1
3
BACK CANCEL
Figure 3-11 — Optional MKP 10 MAAP keypad
The keypad on the MKP 3000 L is laid out and functions
the identically to the MKP 10 MAAP keypad.
1 Power LED — When lit, this LED indicates that power is
applied to the keypad.
2 Cancel key — Press and release the Cancel key to reset the
selected input or output value shown in the MKP 3000’s LCD
display to 000 before using the numeric keys (
3
) to enter a
specific value.
3 Numeric keys — Press and release the numeric keys (0 through
9) to enter a specific value as the selected input or output shown
in the MKP 3000’s LCD display.
4 Back key — Press and release the Back key to backspace (erase)
the least-significant (rightmost) digit shown in the LCD display.