Front panel controls and indications, Local operation, Extron – Extron Electronics MKP 3000 Series User Manual
Page 21
MKP 3000 Series • Local Operation
MKP 3000 Series • Local Operation
Local Operation
The labels in these buttons can be removed and replaced to
reflect the function of the button. A sheet of labels is provided
with the MKP. See “Changing Button Labels” in appendix A,
“Reference Information,” for the procedure for changing these
labels.
1
LCD display
— Shows the input, output, preset name and
number, or volume level during operation. In certain modes, it
can also show the IP addresses programmed into the MKP.
The LCD display shows the most recent input, output, or
preset name and number entered from this MKP. Ties
created using other devices (other MKPs, a PC or control
system, or the matrix switcher’s front panel) are not
shown in the LCD display.
2
Input/Preset button
— Selects an input or places the MKP in
preset mode.
3
Output/View button
— Selects an output or places the MKP in
view mode.
4
Take button
— Takes (activates) a new tie or preset. This button
is the equivalent of the Enter button on the matrix switcher’s
front panel.
5
Select knob
— This knob, when rotated, scrolls through the
available inputs, outputs, or presets. It also ramps volume up
or down, depending on which of buttons
2
and
3
and which
operating mode are selected. The inputs, outputs, presets, or
volume level are shown in the LCD display (
1
).
When the connected switcher has a large matrix size (up
to 128 by 128) selecting an input or output number by
rotating the Select knob can be inconvenient. An
optional MKP 10 MAAP keypad allows rapid input/
output selection.
6
Keypad (MKP 3000 L)
— Use these buttons to select inputs
and/or outputs as an alternative to using the Select knob (
5
),
on the MLK 3000 L only.
7
Power LED (MKP 3000 L) —
When lit, this LED indicates that
power is applied to the MKP 3000 L keypad.
8
Input/Output (I/O) (video/audio) selection button
— Press the
I/O button to select video and audio, video only, or audio only
for the current input and output selections. As you cycle
through the selections, the button lights amber for video and
audio, green for video only, and red for audio only. This button
also selects audio volume mode.
3-3
3-2
Front Panel Controls and Indications
I / O
SELECT
Extron
MKP 3000
INPUT TAKE
OUTPUT
VIDEO
GREEN
AUDIO
RED
2
4
3
1
5
8
Figure 3-1 — MKP 3000 controls and indicators
The MKP 3000 MAAP front panel has the same controls
and indicators.
MKP 3000 L
BACK
CANCEL
1 2 3
4 5 6
7 8 9
0
I / O
SELECT
INPUT
TAKE
OUTPUT
VIDEO
GREEN
AUDIO
RED
Extron
4
3
1
5
2
7
8
6
Figure 3-2 — MKP 3000 L controls and indicators
The buttons on this panel perform different functions,
depending on the MKP’s operating mode. See “Front Panel
Operations,” later in this chapter, for a more detailed
description of the modes.