Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 78)

Operation, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Operation 3-48
PRELIMINAR
Y
Performing soft system resets (resets 3, 4, and 5)
Perform a soft reset of the switcher as follows:
1 . Use an Extron Tweeker or other small screwdriver to press and hold the rear
panel Reset button until the rear panel Reset LED and the front panel Video
and Audio buttons blink once (events reset), twice (system reset), or three
times (absolute reset).
RESET
LAN
CT LINK
RESET
LAN
CT LINK
RESET
LAN
CT LINK
Events
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
3 seconds
Reset LED
flashes once.
Release the
Reset button.
Reset LED
flashes three
times.
IP Settings
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
6 seconds
Reset LED
flashes twice.
Release the
Reset button.
Reset LED
flashes three
times. 2 3
3 3
Absolute
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
9 seconds
Reset LED
flashes three
times.
Release the
Reset button.
Reset LED
flashes three
times.
1 3
2 . Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.