Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 59)

3-29 MPX Plus 866 A Media Presentation Matrix Switcher • Operation
PRELIMINAR
Y
Example 8: Saving a global ties preset
In the following example, the current configuration is saved as a global ties preset.
The steps show the front panel indications that result from your actions.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press and release the Esc button.
The button flashes once.
2 . Select Save Preset mode : Press and hold the Preset button for approximately
2 seconds until it blinks.
PRESET PRESET
COMPUTER INPUTS
1 2 3 4 5 6 7 8
1 2 3 4 5 6
Press and hold the Preset button until it blinks.
Release the button.
2 seconds
All input and output buttons with
assigned presets light red.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
Preset Assigned
COMPUTER/AUDIO OUTPUTS
No Preset Assigned
3 . Select the preset number : Press and release the input or output button for the
desired preset.
C O N T R O L
PRESET ENTER ESC VIEW
COMPUTER INPUTS
1 2 3 4 5 6 7 8
• The Enter button blinks to
indicate the need to save
the preset.
• The Preset button
continues to blink.
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not saved.
4 . Confirm the preset save : Press and release the Enter button. The current
configuration is now stored in the selected memory location.
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset buttons return
to unlit or background illumination.
Press the Enter button to
save the preset.
All input buttons return to unlit
or background illumination.