Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 177)

6-13 MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation
PRELIMINAR
Y
5 . Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N Note the folder to which the firmware file is saved.
6 . Click Finish to exit the program.
7 . Connect the PC to the matrix switcher via the switcher’s Ethernet port.
8 . Access the matrix switcher using HTML pages.
9 . Click the Configuration tab.
10 . Click the Firmware Upgrade link.
11 . Click the Browse button. An open file window appears.
12 . Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N Valid firmware files must have the file extension ‘.S19’. Any other file extension
is not a firmware upgrade.
N The original factory-installed firmware is permanently available on the matrix
switcher. If the attempted firmware upload fails for any reason, the switcher
automatically reverts to the factory-installed firmware.
13 . Click the Open button.
14 . Click the Upload button. The firmware upload to the switcher may take a few
minutes.