Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 18)

Introduction, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Introduction 1-8
PRELIMINAR
Y
General features
Switching flexibility — Provides individually buffered, independent matrix
switched outputs with audio follow and audio breakaway.
N Program audio inputs are independent of the video groups, but must be tied to
the computer/audio group (outputs 1 through 6).
• Tie any input to any or all outputs within a video group
• Quick multiple tie — Multiple inputs can be switched to multiple outputs
within a video group simultaneously. This allows all displays (outputs) to
change from source to source at the same time.
• Audio follow — Audio can be switched with its corresponding video input
via front panel control or under Ethernet or RS-232 remote control.
• Audio breakaway — Audio can be broken away from its corresponding
video signal. This feature allows any audio signal to be selected with any
video signal simultaneously to one or all outputs in any combination. Audio
breakaway switching can be done via front panel control or under Ethernet or
RS-232 remote control.
Operational flexibility — Operations such as input/output selection, setting of
presets, and adjustment of audio levels can be performed on the front panel
or via the Ethernet or RS-232 ports. The Ethernet and RS-232 ports allow
remote control via a PC or control system. The Ethernet link allows multiple
remote links with two levels of password protection.
• Front panel control — The front panel controller supports input and output
selection, preset creation and selection, RGB delay (computer video group),
and audio gain and attenuation and volume control. The front panel features
illuminated pushbuttons that can be labeled with text or graphics.
• Windows-based control program — For RS-232 remote control from a
PC, the two Extron Windows-based control programs provide graphical
interface and drag-and-drop/point-and-click operation. The Windows-based
control programs also have emulation modes that let you create switcher
configuration files at the home office and then download them for use by the
switcher on site.
• Simple Instruction Set (SIS ™ ) — The remote control protocol uses Extron’s
SIS for easy programming and operation.
• Remote control panels and keypads — The switcher is remote controllable,
using the optional MKP 2000 and MKP 3000 remote control panels. The
remote control devices are easy to use and provide tactile buttons for quick
selection. Each MKP can be used for input-to-output switching or one-touch
switching for a particular output and selecting presets.
Upgradeable firmware — The firmware that controls all switcher operation can be
upgraded in the field via RS-232 or Ethernet, without taking the switcher out
of service. Firmware upgrades are available for download on the Extron Web
site, www.extron.com , and they can be installed using the Windows-based
control program.
Labeling — Extron’s included label software lets you create labels to place in the
front panel I/O buttons, with names, alphanumeric characters, or color
bitmaps for easy and intuitive input and output selection. Alternatively,
labels can be made with any Brother ™ P-Touch ™ or comparable labeler.
Global memory presets — 32 global memory presets are a time-saving feature that
lets you set up and store input/output configurations in advance. You can
then recall those configurations, when needed, with a few simple steps.