Xylem photoLab 6100 VIS - Manual (Page 56)

Operation photoLab
®
6100 VIS
56 ba75847e01 08/2009
Measuring the
reagent blank value
Inserting a cell with barcode starts
a measurement.
If a cell without barcode is used:
Select the method manually
(see section 4.5.5).
The photometer is ready to
measure.
1 Using , open the
Adjust selection list.
2 Select and confirm Blank value.
The window for the measurement
of the reagent blank value pops
up.
The data of the last measurement
appears in the measured value
display.
Concentration
Concentration 04/16/07 9:52
Please select method for measuring
or insert a barcoded cell
or insert AutoSelector.
Setup Method list Last method New Method
Concentration 04/16/07 9:52
To start measurement,
insert cell or press
3: A6/25 NH
4
-N
16 mm 0.20 - 8.00 mg/l
Setup Method list Citation form Unit
Concentration 04/16/07 9:52
3: A6/25 NH
4
-N
16 mm 0.20 - 8.00 mg/l
Setup Method list Citation form Unit
Adjust
Zero adjustment
Blank value