Xylem photoLab 6100 VIS - Manual (Page 25)

photoLab
®
6100 VIS Operation
25 ba75847e01 08/2009
4 Operation
4.1 Switching on or off the photometer
Switching on
Starting the
Self test
1 Switch the photometer on with
.
The display shows
– the Self test dialog (if the user
management is not active).
or
– the Login dialog
(if the user management is
active).
With activated user management:
2 Login
Enter user name and password or
register as a guest (see section
4.15.4).
Then the photometer displays the
Self test dialog.
Self test 04/16/07 9:52
Please make sure no cell is inserted and the cover is closed.
Then press
Setup Info
Login 04/16/07 9:52
Enter user name
Administrator
3 Remove all cells and close the cell
shaft cover.
4 Start the self-test with
.
The photometer carries out the
self-test.
Self test 04/16/07 9:52
Please make sure no cell is inserted and the cover is closed.
Then press