Xylem photoLab 6100 VIS - Manual (Page 103)

photoLab
®
6100 VIS Operation
103 ba75847e01 08/2009
For each export procedure you can select the location where the PC-
readable files (*.csv) should be stored: either the photometer (Internal DataB
folder) or an external memory (USB memory).
The files stored in the photometer (Internal DataB folder) can later be
transferred to a connected PC or to an external memory (USB memory).
You can transfer to a USB memory device either individual files with
measurement data or all files stored in the internal Internal DataB folder.
z Individual files (see section 4.12.1)
z All files (see section 4.12.2)
Measurement data Save, back up, export
Concentration,
Absorbance / %
Transmission
Multi wavelengths
Measurement datasets of these measuring
modes are first stored in the measured value
memory of the photometer (1000 memory
locations) with or AutoStore.
The measured value memory is available
from the Measurement data memory menu.
Here you can view, filter and export into a PC-
readable file (*.csv) the stored measurement
datasets ().
Csv files of these measuring modes cannot
be reimported to the photometer.
Spectrum
Kinetics
You can store and export measurement data
of these measuring modes directly as a PC-
readable file (*.csv) with .
Csv files of these measuring modes can be
reimported and displayed on the photometer.
AQA records You can store and export measurement data
of these measuring modes directly as a PC-
readable file (*.csv) with .
Csv files of records cannot be reimported to
the photometer.