Xylem photoLab 6100 VIS - Manual (Page 108)

Operation photoLab
®
6100 VIS
108 ba75847e01 08/2009
Each of these options indicates the contents of the measurement data
memory as a list as follows.
Options Measurement datasets can be
z displayed in short form as a list or in details as individual values ([List] <–>
[Single value])
z filtered (see section 4.11.7 and section 4.11.8)
z deleted (see section 4.11.9).
z with , you can store the entire displayed list as a *.csv file in the
internal DataB folder or on a USB memory device connected to the USB-
A connection. The filter settings apply to the storing process. You can
freely select the file name. Thus you can, e. g. store in a separate file and
systematically archive measurement data of a certain period.
z with , the entire displayed list can be printed. The filter settings
apply to the print process.
If there are more datasets
available than can be displayed,
the arrows
▲ and ▼
are displayed
additionally.
Filter
✓ indicates that filter settings
are active. In this case, only those
datasets are displayed that
correspond to the selected filter
criteria (see section 4.11.7).
Measurement data memory 04/16/07 9:52
27.03.07 14:00 3.50 mg/l Ni Administrator AutoStore
27.03.07 14:05 3.64 mg/l Ni Administrator AutoStore
27.03.07 14:10 3.69 mg/l Ni Administrator AutoStore
27.03.07 14:15 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:20 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:25 3.75 mg/l Ni Administrator AutoStore
27.03.07 14:30 3.73 mg/l Ni Administrator AutoStore
27.03.07 14:35 3.80 mg/l Ni Administrator AutoStore
27.03.07 14:40 3.78 mg/l Ni Administrator AutoStore
Filter
Memory allocation: 9/1000
Setup Single value Delete