Xylem photoLab 6100 VIS - Manual (Page 21)

photoLab
®
6100 VIS Commissioning
21 ba75847e01 08/2009
3.3.2 PC/printer
PC and printer can be connected to the photometer as follows:
Note
Suitable are all printers that can interpret the PCL-3 printer control language.
Interface PC Printer Functions
RS232 The data is sent to the interface with
.
z If a printer is connected the data is
printed out.
z If a PC is connected, the data can be
received with a terminal program
(see section 4.13).
USB-A The data is printed out with .
USB-B - Enables the direct connection of
photometer and PC. With this you can
transmit measurement data to the PC
(see section 4.12section 4.13) or update
the photometer software (see section
4.19.1).
The direct connection with the PC is
established with the aid of the
"SpectralTransfer" program. The
program is provided on the supplied CD-
ROM.
More instructions on how to establish
the connection are given in the
operating manual of the
"SpectralTransfer" program (see CD-
ROM).