Xylem photoLab 6100 VIS - Manual (Page 141)

photoLab
®
6100 VIS Operation
141 ba75847e01 08/2009
4.15.4 Login with active user management
To be able to always assign measurement data to a user, the administrator
can activate the user management function. After doing so, the photometer
can only be operated after login with a user name. Depending on the
authorization class (administrator, user, guest), important settings are
released for changes or locked.
Note
The user management function is not active in the delivery condition of the
photoLab
®
6100 VIS. Every user can carry out all functions.
When the user management function is activated, a user account for the
administrator is created. The user name is "Administrator".
The preset password for this user account is "admin".
Change this password as soon as possible.
Make sure to use the correct spelling (upper and lower case) of user name
and password for the login.
After logging in to the Administrator group with a user name, you can create
further users or administrators or switch off the user management function.
The Login window with the Enter user name prompt appears after the meter
has been switched on and after a user has logged off.
In the following example, a user will log in with the user name,
"Administrator".