GE Industrial Solutions Entellisys 5.0 Integrator's Guide User Manual
GE Industrial Solutions Equipment
Table of contents
Document Outline
- 1HeadTOC - 1.1 PLC Inputs 8
- 1HeadTOC - 1.2 Breaker Control 11
- 1HeadTOC - 1.3 Restricted Breaker Control 12
- 1HeadTOC - 1.4 CPU External Control Transfer 14
- 1HeadTOC - 1.5 Modbus Security 18
- 1HeadTOC - 1.6 Interfacing to the Alarm Handler 19
- 1HeadAnywhereTOC - 2.1 System Status 23
- 1HeadTOC - 2.2 Multipoint FlexLogic Operand States 37
- 1HeadAnywhereTOC - 3.1 Introduction 45
- 1HeadAnywhereTOC - 3.2 Physical layer 45
- 1HeadTOC - 3.3 Data link layer 46
- 1HeadTOC - 3.4 CRC-16 Algorithm 47
- 1HeadTOC - 3.5 Supported function codes 48
- 0_ChapterTitle - Control Features
- 0_ChapterTitle - Entellisys Status Definitions
- 1HeadAnywhere - 2.1 System Status
- 2Head - 2.1.1 Breaker Status
- 2Head - 2.1.2 CPU FlexLogic Status
- 2HeadTop - 2.1.3 IOC Operand States
- 2HeadTop - 2.1.4 ST Overcurrent Operand States
- 2HeadTop - 2.1.5 LT Overcurrent Operand States
- 2HeadTop - 2.1.6 High Current and High Current Transient Operand States
- 2HeadTop - 2.1.7 High Current Flex Relay Operand States
- 2HeadTop - 2.1.8 Ground Fault Operand States
- 2HeadTop - 2.1.9 Over (and Under) Frequency Operand States
- 2HeadTop - 2.1.10 Over (and Under) Voltage Operand States
- 2HeadTop - 2.1.11 Under Voltage Flex Relay Operand States
- 2HeadTop - 2.1.12 Phase Loss Operand States
- 2HeadTop - 2.1.13 Power Reversal Operand States
- 2HeadTop - 2.1.14 Over (and Under) Demand Metering Alarm Operand States
- 1Head - 2.2 Multipoint FlexLogic Operand States
- 2Head - 2.2.1 Bus Differential Operand States
- 2HeadTop - 2.2.2 MSGF Overcurrent Operand States
- 2HeadTop - 2.2.3 HRGF Detection Operand States
- 2HeadTop - 2.2.4 HRGF Location Operand States
- 2HeadTop - 2.2.5 Reduced Energy Let - Thru Operand States
- 2HeadTop - 2.2.6 Summation MSGF Zone Operand States
- 2HeadTop - 2.2.7 Synch Check Operand States
- 1HeadAnywhere - 2.1 System Status
- 0_ChapterTitle - Modbus® protocol implementation
- 1HeadAnywhere - 3.1 Introduction
- 1HeadAnywhere - 3.2 Physical layer
- 1Head - 3.3 Data link layer
- 1Head - 3.4 CRC-16 Algorithm
- 1Head - 3.5 Supported function codes
- 2Head - 3.5.1 Function Code 03H/04H - Read Actual Values or Settings
- 2HeadTop - 3.5.2 Function Code 05H - Execute Operation
- 2HeadTop - 3.5.3 Function Code 06H - Store Single Setting
- 2HeadTop - 3.5.4 Function Code 10H - Store Multiple Settings
- 2Head - 3.5.5 Exception responses
- 2Head - 3.5.6 File transfers
- 0_ChapterTitle - Modbus Memory Map
- 0_ChapterTitle - Modbus Memory Map Format Codes