Ocean Optics OOIBase32 - Manual (Page 89)

10: Other Menu Functions
Time Channels Combination 1 and 2
These tabs allow you to configure a time acquisition process for a combination of two time channels.
Select one of the Combination tabs to modify information for that combination.
The following options are available from the Combination tabs on the Time Acquisition Channel
Configuration dialog box.
Option Description
Enabled Enables the time acquisition calculation for the combination.
Plotted
Instructs OOIBase32 to plot the time acquisition data in a spectral
window.
Each channel or combination of channels for a time acquisition results in
one less Overlay being available in the same spectral window as the time
acquisition process. If you specify Combination 1 for the time acquisition,
Overlay 1 will not be available in the spectral window. If you specify
Combination 2 for the time acquisition, Overlay 2 will not be visible.
First Channel Specifies the first time acquisition channel for the time Combination 1.
Operation
Specifies the mathematical operation to perform on both the First
Channel and the Second Channel to produce the time acquisition
Combination 1 data.
Second Channel Specifies the second time acquisition channel for the time Combination 1.
Factor (multiply)
Contains a multiplicative factor that OOIBase32 will apply to time
acquisition data before it plots or stores the data.
Offset (add)
Contains an additive constant that OOIBase32 will apply to the time
acquisition data after it applies the factor and before it plots or stores the
data.
000-20000-020-02-0505 79