Ocean Optics OOIBase32 - Manual (Page 130)

C: File Formats
ReferenceType
Type of reference monitoring applied, 0=none, 1=single point,
2=wavelength-by-wavelength, 3=integrated intensity
ReferenceWavelength Reference wavelength, used in single point reference monitoring
ReferenceBandwidthStart Starting wavelength of the integrated intensity for reference monitoring
ReferenceBandwidthEnd Ending wavelength of the integrated intensity for reference monitoring
ReferenceBandwidthPixel
Spectrometer pixel of the reference wavelength used in reference
monitoring (for single-point reference monitoring)
ReferenceBandwidthStartPixel
Spectrometer pixel of the starting integrated intensity wavelength used
in reference monitoring
ReferenceBandwidthEndPixel
Spectrometer pixel of the ending integrated intensity wavelength used
in reference monitoring
The following is an example of a Spectrometer Configuration File:
[General]
OOIBase32 Version=2.0.1.3
OOIDrv32 Version=4.07.01
SpectrometerType=S2000
ADCType=USB2000
SerialNumber=
SpectrometerSubType=0
IRQ=7
BaseAddress=768
SerialPort=0
SerialPortResolution=1
Initialized=1
ADC1000ChannelRotation=0
PCICardID=0
DisplayLimitedRange=0
S1024DWOffset=0.000000
SAD500Compression=0
SerialPortBaudRate=6
USBSerialNumber=
ScopeModeSaturationThreshold=4095.000000000000000
[Channel0]
WLFirst=0.397382
WLSecond=-2.126880e-005
WLThird=-2.117980e-009
WLIntercept=333.465424
NLEnabled=0
SLEnabled=0
SLConstant=0.000000e+000
NLCoef0=9.521558e-001
NLCoef1=3.226242e-005
NLCoef2=4.538580e-009
NLCoef3=-6.088067e-012
NLCoef4=8.477879e-016
NLCoef5=0.000000e+000
NLCoef6=0.000000e+000
120 000-20000-020-02-0505