Ocean Optics OOIBase32 - Manual (Page 68)

7: Spectrometer Menu Functions
The software automatically populates the values in the Detector Linearity tab from the information on
the spectrometer EEPROM chip in some spectrometers.
For all other devices, you must run the OOINLCorrect program available at the following address:
http://www.oceanoptics.com/technical/softwaredownloads.asp .
When you run OOINLCorrect, the software prompts you to update your driver files and default
spectrometer configuration file. At this prompt, specify the configuration file that accompanied the
spectrometer you are using. OOINLCorrect will obtain the Detector Linearity information from this file
and load these values into OOIBase32 automatically.
You still must manually enable the detector linearity correction feature.
Contact Ocean Optics Technical Support for assistance, if necessary.
Open Configuration
This option allows you to open a file containing saved spectrometer configuration parameters.
► Procedure
1. Select Spectrometer | Open Configuration. A dialog box prompts you to navigate to the
configuration file you wish to open.
2. Selecting the file. A message box opens asking if you would like to make the selected
configuration file the default configuration file.
3. Select Yes or No. You can save multiple configuration files and switch easily among them.
58 000-20000-020-02-0505