Ocean Optics OOIBase32 - Manual (Page 29)

3: File Menu Functions
Autoincrement Filenames
The Autoincrement Filenames option allows you to name and save spectra automatically when you click
the Save command in OOIBase32. Select File | Autoincrement Filenames | Enabled to enable this
feature.
When you enable this feature, choosing any save command automatically saves all spectra in the spectral
window and names the file with a base name and numerical index you specify.
The following table illustrates a sample file name structure:
Test The base name that you specified.
00012 A sequential numerical index beginning from a user-specified number.
Master
The spectrometer channel name, which OOIBase32 automatically adds to the
filename.
Irradiance
The file extension, which OOIBase32 automatically adds to the filename. In this
instance, it indicates that OOIBase32 saved the data while in relative irradiance
mode.
In this example, the specified values result in an autoincremented filename of Test.00012.Master.Irradiance.
Note
If you do not enable the Autoincrement Filenames function, a save file dialog box will
open every time you choose a save command.
Enabled
Select File | Autoincrement Filenames | Enabled to enable (or disable, if already checked) the
autoincrement filenames function.
Show Name
Select File | Autoincrement Filenames | Show Name to enable the Show Name option. When you
enable both this option and the Autoincrement Filenames option, the filename of the next saved file will
display in the title bar of OOIBase32.
000-20000-020-02-0505 19