Spectrometer menu functions, Overview, Configure – Ocean Optics OOIBase32 User Manual
Page 59: Wavelength calibration tab, Chapter 7, Overview configure
Chapter 7
Spectrometer Menu Functions
Overview
This section details the various options and functions available from the Spectrometer menu in
OOIBase32.
Where applicable, toolbar icons associated with the function appear below the section heading. Click on
these icons in OOIBase32 to perform the described function.
Configure
This option opens the Spectrometer Configuration dialog box. This dialog box provides the ability to
configure your spectrometer. It includes parameters for wavelength calibration, A/D converter interfacing,
reference monitoring, stray light correcting, and detector linearity correction.
OOIBase32 loads the information contained in the Spectrometer Configuration dialog box as part of the
default spectrometer file.
Note
The parameters set in this dialog box apply only to a designated spectral window. Each
spectral window may have a different spectrometer configuration.
Select Spectrometer | Configure from the menu. The Spectrometer Configuration dialog box opens.
Wavelength Calibration Tab
The Wavelength Calibration tab allows you to enter or change the serial number of your spectrometer
and the wavelength calibration coefficients of each spectrometer channel.
000-20000-020-02-0505
49