Rainbow Electronics 900 - Manual (Page 88)

FLYFOT-M260-MODULE
Page: 88 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+CSCS=?
Note : Get possible values
+CSCS: (“GSM”,”UCS2”,”HEX”)
OK
Note : Possible values
9.19.3 Defined values
“GSM” GSM default alphabet.
“HEX” Hexadecimal mode. No character set used ; the user can read or write hexadecimal values.
9.20 Select Cell Broadcast Message Types +CSCB
9.20.1 Description
This command selects which types of CBMs are to be received by the ME. It is allowed in both PDU and
text modes.
9.20.2 Syntax
Command syntax : AT+CSCB= , [ , [ ] ]
Important note : Test read command (AT+CSCB ?) is not supported.
Command
Possible responses
AT+CSCB=0,.15-17,50,86.,..
Note : Accept SMS-CB types, 15,16,17,50
and 86 in any language OK
Note : CBMs can be received
+CBM : 10
00112233445566778899
Note : CBM length of a received Cell
Broadcast message (SMS-CB), CBM bytes in
PDU mode)
AT+CSCB=1
Note : Deactivate the reception of CBMs OK
Note : CBM reception is completely stopped
9.20.3 Defined values
The parameter of +CNMI command controls the message indication. The activation of CBM
reception (=0) can select only specific Message Identifiers (list in ) for specific Languages
(list in ), but the deactivation stops any reception of CBMs (only AT+CSCB=1 is allowed) Message
Identifiers ( parameter) indicates to which type of message identifiers the ME should listen.
: Supported languages
0 German
1 English
2 Italian
3 French
4 Spanish