Rainbow Electronics 900 - Manual (Page 214)

FLYFOT-M260-MODULE
Page: 214 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
18.42.2 Syntax :
Command syntax : AT+WSST=[][,]
Command Possible responses
AT+WSST=0 OK
Note : Set volume to Max.
AT+WSST=15 OK
Note : Set volume to Min.
AT+WSST=,5 OK
Note : Set ring tone level to 5
AT+WSST? +WSST: 15,5
Note : getcurrent standard tones sound level OK
Note : current standard tones level is
15 (mini.), and ring tone level is 5.
AT+WSST=? +WSST: (0-15),(0-15)
Note : supported parameters OK
18.42.3 Defined values :
Range [0 ; 15]
0 : Maximum volume (default)
15 : Minimum volume
Range [0 ; 15]
0 : Maximum volume (default)
15 : Minimum volume
18.43 FLYFOT Location +WLOC
18.43.1 Description :
This specific command can be used by the application to retrieve the following
local informations : MCC-MNC, LAC, CI, Network measurement, BCCH channel
list, Timing Advance, Date and Time.
Two ways exist for the external application to get these information : on
request of the application, or automatically by the module every x seconds (x
has to be a multiple of 5 different from 0).