Rainbow Electronics 900 - Manual (Page 100)

FLYFOT-M260-MODULE
Page: 100 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
4: incoming (MT call)
5: waiting (MT call)
(teleservice) :
0 : voice
1: data
9: unknown
(multiparty)
0: call is not one of multiparty (conference) call parties
1: call is one of multiparty (conference) call parties
string type phone number in format specified by
type of address byte in integer format
optional string type alphanumeric representation of , corresponding to the entry
found in phonebook. (for UCS2 format see commands examples +CLIP, +CCWA or +COLP)
10.10 Supplementary service notifications +CSSN
10.10.1 Description:
This command refers to supplementary service related network initiated notifications.
10.10.2 Syntax:
Command syntax: AT+CSSN= ,
When =1 and a supplementary service notification is received after a mobile originated call setup,
intermediate result code +CSSI:[,] is sent before any other MO call setup result codes.
When =1 and a supplementary service notification is received during a call, unsolicited result code
+CSSU:[,[,,]] is sent.
Command Possible responses
AT+CSSN?
+CSSN: 0,0
OK
10.10.3 Defined values
(parameter sets/shows the +CSSI result code presentation status) :
0: disable
1: enable
(parameter sets/shows the +CSSU result code presentation status) :
0: disable
1: enable