Rainbow Electronics 900 - Manual (Page 73)

FLYFOT-M260-MODULE
Page: 73 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
9.4 Save Settings +CSAS
9.4.1 Description:
All settings specified by the +CSCA and +CSMP commands are stored in EEPROM if the SIM card is
a Phase 1 card or in the SIM card if it is a Phase 2 SIM card.
9.4.2 Syntax:
Command Possible responses
AT+CSAS
Note: Store +CSAS parameter OK
Note: Parameter Stored
AT+CSAS?
AT+CSAS=? +CMS ERROR: 3
Note: not supported.
9.4.3 Defined values:
No parameter
9.5 Restore settings +CRES
9.5.1 Description:
All settings specified in the +CSCA command is restored from EEPROM if the SIM card is Phase 1 or
from the SIM card if it is a Phase 2 one.
9.5.2 Syntax:
Command Possible responses
AT+CRES
Note: Restore +CSAS parameter OK
Note: Parameter restored
AT+CRES?
AT+CRES=? +CMS ERROR: 3
Note: not supported.
9.5.3 Defined values:
No parameter
9.6 New message indication +CNMI
9.6.1 Description:
This command selects the procedure for message reception from the network.