beautypg.com

3 defined values, 23 flyfot software version +wssw, 1 description – Rainbow Electronics 900 User Manual

Page 190: 2 syntax, 24 flyfot custom character set +wccs, 23 flyfot, Software version +wssw, Flyfot custom character set +wccs

background image

FLYFOT-M260-MODULE

Page: 190 / 239

This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.

18.22.3 Defined values

0 : No melody (default)
1 - 10 : Melody 1 to 10

0 : Melody n° will be played on the buzzer for any new incoming voice call. (default)
1 : Melody n° will be played on the speaker for any new incoming voice call.

18.23 FLYFOT Software version +WSSW

18.23.1 Description :

This specific command displays some internal software reference.

18.23.2 Syntax :

Command syntax : AT+WSSW

18.23.3 Defined values :

No parameter

18.24 FLYFOT Custom Character Set +WCCS

18.24.1 Description :

This specific command allows to edit and display the custom character set tables. These tables are used
by the “CUSTOM” mode of +CSCS and the +WPCS commands. In this CUSTOM mode, when the user
enters a string, it is converted into GSM alphabet using the Custom To GSM table. In a similar way, when
the user requests a string display, the string is converted from GSM alphabet using the GSM To Custom
table.

In edition mode, the session is terminated by , or aborted by . Only hexadecimal
characters (‘0’…’9’, ‘A’…’F’) can be used. The number of characters entered must be equal to the edition
range requested, otherwise the command will return “+CME ERROR: 3”.

18.24.2 Syntax :

Command syntax : AT+WCCS=,,[,]

See also other documents in the category Rainbow Electronics GPS receiver: