Rainbow Electronics 900 - Manual (Page 200)

FLYFOT-M260-MODULE
Page: 200 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Forward Activated indicator for Line 1. Note :Call Forward is active for Line 1.
AT+CPHS=2,6,22 +WCPI: 22,0
Note :Get the current status for Line 2 OK
Mailbox number. Note :Mailbox number for Line2 is not
available.
AT+CPHS=2,6,17 +CME ERROR: 3
Wrong data field
AT+CPHS=2,6,22 +CME ERROR: 3
Note :Get the current status for Line 2 Note :CPHS Feature is not allowed
Mailbox number.
AT+CPHS=0,6 OK
Note :Deactivation of CPHS Info Note :No effect.
feature.
18.30.3 Defined values
: value indicating the field of CPHS information (see appendix 19.14)
If field omitted in the AT+CPHS command, all field of CPHS Info will be displayed.
0 : data field is set
1 : data field is unset
When all CPHS information are requested, the status correspond to a bit field
(see appendix 19.14)
Note : The field CSP service ( = 1) is used to set or not the CSP feature at the initialisation.
18.31 FLYFOT customer service profile: +WCSP
18.31.1 Description
This indication indicates if a service is accessible to the customer. This is the response to the
AT+CPHS 2,7, command.
18.31.2 Syntax
Command : AT+CPHS=2,7,
Response syntax: +WCSP: ,
Command Possible responses
AT+WCSP=? ERROR
AT+WCSP? ERROR
AT+CPHS=2,7 +CME ERROR: 3
Note :Syntax error
AT+CPHS=2,7,9 +WCSP: 9,1
Note :Get the current status for OK