Rainbow Electronics 900 - Manual (Page 17)

FLYFOT-M260-MODULE
Page: 17 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged
without prior written agreement.
AT+CCID?
Note : Get current value + CCID: “123456789AB111213141”
Note : Same result as +CCID
AT+CCID = ?
Note : Get possible value OK
Note : No parameter but this command is valid
AT+ CCID =1
+CME ERROR 3
Note: not support
If there is no EF-CCID file present on the SIM, the +CCID answer will not be sent, but the OK
message will be returned.
4.9 Capabilities list +GCAP
4.9.1 Description :
This command gets the complete list of capabilities.
4.9.2 Syntax :
Command syntax : AT+GCAP
Command
Possible responses
AT+GCAP
Note :Get capabilities list +GCAP;+CGSM
OK
Note: Support GSM command
4.9.3 Defined values :
No parameter
4.10 Repeat last command A/
4.10.1 Description :
This command repeats the previous command. Only the A/ command itself cannot be repeated.
4.10.2 Syntax :
Command syntax : A/
Command
Possible responses
A/
Note Repeat last command
4.11 Power off +CPOF
4.11.1 Description :
This specific command power off FLYFOT M260 module
4.11.2 Syntax :
Command syntax : AT+CPOF