Rainbow Electronics 900 - Manual (Page 216)

FLYFOT-M260-MODULE
Page: 216 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+WLOC=? +CME ERROR:3
Note : The feature “loca” is not activated
AT+WLOC? +CME ERROR:3
Note : The feature “loca” is not activated
AT+WLOC=?
Note : The feature “loca” is activated OK
AT+WLOC?
Note : The location is not in mode +WLOC: 0,5,255
automatic, the period value is set to 5
seconds, the configuration value is set to OK
255
AT+WLOC? +WLOC: 1,10,20
Note : The location is in mode automatic,
the period value is set to 10 seconds, the OK
configuration value is set to 20
18.43.3 Defined values :
0 : Stop automatic shots
1 : One shot requested
2 : Automatic shots requested (every x seconds)
3 : Configuration of the wished information
for = 2 :
optional parameter –
Range : [5 - 255] – in seconds
it has to be a multiple of 5.
default value of time period : 5 seconds
The automatic mode for location is saved in EEPROM, so will be taken into
account after an Init (+WLOC:… will be displayed).
Fields of the response to AT+WLOC=1 or AT+WLOC=2 :
The format of these fields are as specified in 04.08 :
Parameter Type
MCC-MNC 3 bytes
LAC 2 bytes
CI 2 bytes
Network measurement 16 bytes
BCCH channel list Maximum 48 bytes (version V0)