Rainbow Electronics 900 - Manual (Page 183)

FLYFOT-M260-MODULE
Page: 183 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
: This parameter sets tone gain. The values are identical to those of the +WTONE (speaker)
command. The default value is 9.
Range of values is 0 to 15 (see array on §18.11.3)
: This parameter sets the tone duration (in unit of 100 ms).
Range of values is 0 to 50 (0 is default value, 1 -> 0,1 s., 50 -> 5 s.)
Remark : when = 0, the duration is infinite, and the DTMF tone can be stopped by
AT+WDTMF=0.
18.13 FLYFOT Downloading +WDWL
18.13.1 Description :
This specific command switches the product to download mode. Downloading is performed using the
1K-XMODEM protocol.
18.13.2 Syntax :
Command syntax: AT+WDWL
Command Possible responses
AT+WDWL Note : Switch on downloading mode +WDWL: 0 Note : Start the downloading
…
Note : Downloading in progress
AT+CFUN=1
Note : Reset the product at the end
OK
Note : reset completed, new software
running
18.13.3 Defined values :
No parameter
18.14 FLYFOT Voice Rate +WVR
18.14.1 Description :
This specific command allows the voice rate for bearer voice to be configured (available for outgoing
calls only).
18.14.2 Syntax :
Command syntax : AT+WVR=
Command Syntax Return
AT+WVR=? +WVR: (0,2,3)