Rainbow Electronics 900 - Manual (Page 68)

FLYFOT-M260-MODULE
Page: 68 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
4: Last item read (usable only if a read operation has been performed on the current phonebook since the
end of initialization)
5: Last item written (usable only if a write operation has been performed on the current phonebook since
the end of initialization)
8.7 Subscriber number +CNUM
8.7.1 Description:
This command returns the subscriber MSISDN(s).
If the subscriber has different MSISDNs for different services, each MSISDN is returned in a separate line.
8.7.2 Syntax:
Command syntax: AT+CNUM
Response syntax: +CNUM : , ,
+CNUM : , , ….
Command Possible responses
AT+CNUM=?
Note : Test command OK
Note : No parameter but this command is valid
AT+CNUM?
AT+CNUM=1 +CME ERROR: 3
Note: The product can not support this
command
AT+CNUM
Note : Get MSISDNs +CNUM :“Phone”，“0612345678”，129
Note : MSISDNs
8.7.3 Defined values :
optional alphanumeric string associated with
string type phone number with format as specified by
type of address byte in integer format
8.8 FLYFOT Phonebook Character Set +WPCS
8.8.1 Description :
This specific command informs the ME which character set is used by the TE for the phonebooks. The ME
can convert each character of entered or displayed strings. This is used to read or write phonebook entries.
See also +CSCS for the short messages character sets.
8.8.2 Syntax :
Command syntax : AT+WPCS=