3 defined values, 9 gain control +vgr, +vgt, 1 description – Rainbow Electronics 900 User Manual
Page 32: 2 syntax, 9 gain, Control +vgr, +vgt

FLYFOT-M260-MODULE
Page: 32 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged
without prior written agreement.
5.8.3 Defined
values:
number of rings before automatic answer (3 characters padded with zeros).
Range of values is 0 to 255.
5.9 Gain control +VGR, +VGT
5.9.1 Description:
This command is used by the application to tune the receive gain of the speaker and the
transmit gain of the microphone.
5.9.2 Syntax:
Command syntax: AT+VGR=
AT+VGT=
Command
Possible responses
AT+VGR=5
OK
Note: Command valid
AT+VGT=45
OK
Note: Command valid
AT+VGR?
Note: Interrogate value
+VGR: 5
OK
Note: Default receive gain
AT+VGR=?
Note: Test command
+VGR: (1-10)
OK
Note: Possible values
AT+VGT?
Note: Interrogate value
+VGT: 20 (When AT+SPEAKER=0)
+VGT: 96 (When AT+SPEAKER=1)
+VGT: 32 (When AT+SPEAKER=2)
OK
Note: Default transmit gain
AT+VGT=?
Note: Test command
+VGT: (0-255)
OK
Note: Possible values
5.9.3 Defined
values
:
Note: VGT command is not supported.