Rainbow Electronics 900 - Manual (Page 226)

FLYFOT-M260-MODULE
Page: 226 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
AT+WSVN=11 OK
Note: Update the IMEI SVN
AT+WSVN=256 +CME ERROR: 24
Note: wrong length of the string.
1 <= IMEI SVN <= 255
AT+WSVN=? +WSVN: (1-255)
OK
Note: Command valid
18.49.3 Defined values
IMEI SVN value between 1 and 255
18.50 FLYFOT multi-band selection command: +WMBS
18.50.1 Description
This command permits to select the GSM bands on which the module have to work. This command is
allowed only if the selected bands are supported. The module have to be reset to take this change into
account.
18.50.2 Syntax
Command syntax : AT+WMBS=
Command Possible responses
AT+WMBS= OK
Note: Band mode selected
AT+WMBS= +CME ERROR: 3
Note: Band not allowed
AT+WMBS? +WMBS:, OK
Note: current selected band
mode is returned
AT+WMBS=? +WMBS: (0,3,4) OK
Note: Only 850 mono-band or 850-1900 bi-band are available
AT+WMBS=? +WMBS: (0,1,2,3,4,5,6)
OK
Note: all bands are available
18.50.3 Defined values
: frequency band configuration to be supported
0 : mono-band mode 850 MHz