Rainbow Electronics 900 - Manual (Page 131)

FLYFOT-M260-MODULE
Page: 131 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
This command may be used in both normal and modem compatibility modes.
Remark : This command has the same effects than ATD*99***.
13.7.2 Syntax
Command Possible Response(s)
AT+CGDATA=[] CONNECT
ERROR
AT+CGDATA=? +CGDATA:
OK
AT+CGDATA=? +CGDATA:
OK
AT +CGDATA=1 CONNECT
13.7.3 Defined Values
: a numeric parameter which specifies a particular PDP context definition.
13.8 GPRS mobile station class +CGCLASS
13.8.1 Description
The set command is used to set the MT to operate according to the specified GPRS mobile class. If the
requested class is not supported, an ERROR or +CME ERROR response is returned.
The read command returns the current GPRS mobile class.
The test command is used for requesting information on the supported GPRS mobile classes.
13.8.2 Syntax
Command Possible Response(s)
AT+CGCLASS= [] OK
ERROR
AT+CGCLASS? +CGCLASS:
OK
AT+CGCLASS=? +CGCLASS: (list of supported s)
OK
AT +CGCLASS=”CG” OK
Note : EnterGPRS class Cmode
AT +CGCLASS=”CC” OK