Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 53)

Optimizing Print Speed
53
Brief descriptions follow for the first-level configuration menu options:
• QUICK SETUP — These options allow quick access to the main printer
options used most.
• ZTP SETTINGS These options allow you to set parameters for zero tear
pedestal printers.
• CONFIG. CONTROL — These options allow you to save, print, load,
delete, name, and reset entire sets of configuration parameters.
• HOST INTERFACE — These options allow you to select either the Serial
RS-232, Serial RS-422, Centronics
®
parallel, Data Products parallel,
Ethernet
™
, IEEE
®
1284 parallel, or Auto Switching interface for the
printer. This menu also allows you to configure several parameters for
each interface.
• NETWORK SETUP — This option allows you to select from Ethernet
Address option and Ethernet Parameters options.
• EMULATION — This menu allows you to configure the options which are
available for the current operating (active) emulation.
• PRINTER CONTROL — These options allow you to select several
operating parameters for the printer, such as the speed at which paper
will advance when slewing.
• ADVANCED USER — These options allow you to select several
advanced operating parameters for the printer, such as the speed at
which paper will advance when slewing.
• DIAGNOSTICS — This menu includes the diagnostic tests, system
memory, software build part number, Feature File (if one exists),
the shuttle type, and statistics of the printer.
• DATE — This menu allows you to set the printer’s real time clock. The
parameters include hour, minute, year, month, and day.
• PRINTER MGMT — These options allow you to select the PNE port type,
port number, port timeout period, status port number, and management
port number.
Main Menu