Chapter 3, Caution – Printronix P7000 H-Series Cartridge Ribbon Printer User Manual
Page 40
40
Chapter
3
Integrated Print Management System
Figure 21. The Ribbon Cartridge Snapped in Place
7.
Rock the cartridge downward, making sure that the ribbon goes between
the guide and the mask (see Figure 21). You will feel it snap into place.
CAUTION
Make sure that the ribbon does not twist or fold over.
8.
Turn the ribbon tension knob clockwise a few times to make sure the
ribbon tracks correctly in the ribbon path.
9.
Close the platen lever.
10. Close the printer top cover.
If you want to increase the darkness level of the ribbon at the end of life, go to
“Ribbon End Point” on page 57 and follow the procedures for adjusting the
image density.
If you are satisfied with the print darkness, press the
(
ON LINE/CLEAR)
key twice to return the printer to operation.
TO
F
TOF
183872a
TOF
TO
F
TOF
TO
F
183874a
Ribbon
Cartridge
A
Hammerbank
Cover
Ribbon Mask
Ribbon Cartridge
Ribbon
Ribbon Tension Knob
A