Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 100)

100
Chapter 4 EMULATION
Error Handling
This command determines the way illegal DBCS characters are processed:
• Normal (the default). Will ignore illegal DBCS characters.
• As Space . Will insert two space characters (0X20, 0X20) when the data
stream contains the illegal DBCS character.
• As Square . Will insert a black square (0xAIBD) when the data stream
contains the illegal DBCS character. This is applicable for the Hanzi Big5
build only.
Page Format Submenu
Page Format
Form Length.
Forms length is the number of lines that can be printed on a page. You can
set the form length in inches, millimeters (mm), or as a function of the current
lpi (lines per inch).
Form Width
The form width can be specified in inches, millimeters, or as a function of the
current cpi (characters per inch). The forms width set should not exced the
actual paper width.
Page Format
(from page 92)
Margins
Left Margin
0* columns
(0-369)
Right Margin
0* columns
(0-369)
Bottom Margin
0* lines
(0-451)
* = Factory Default for Hanzi and Hangul printer
** = Factory Default for Kanji printer
Perforation
Skip
Disable*
1/2 inch
2/3 inch
5/6 inch
1 inch
Form
Length
Abs. Length IN
11.0* inches
08.5** inches
(0.1-24)
Abs. Length MM
279.4* mm
215.9** mm
(0.1-609.6)
Funct. of Lines
66* Lines
68** Lines
(1-192)
Form
Width
Abs. Width IN
13.6* inches
(0.1-13.6)
Abs. Width MM
345.4* mm
(0.1-345.5)
Funct. of CPI
136* Characters
204** Characters
(1-272)