Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 133)

Fault Messages
133
Figure 27. Hex Dump Sample
Fault Messages
If a fault condition occurs in the printer, the status indicator on the control
panel flashes on and off, and the message display indicates the specific fault.
Fault messages are summarized in Table 10.
Displayed faults fall into one of two categories:
• Operator correctable
• Field service required
For the operator-correctable faults, follow the suggested solution in Table 10.
After correcting the displayed fault, press the CLEAR key to clear the error
message and status indicator and resume printing. If the fault message
reappears, contact your authorized service representative.
NOTE: The Maintenance Manual provides more detailed information and
procedures for resolving fault conditions. However, many of the
procedures described there must be performed only by your
authorized service representative
.