Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 45)

Changing Parameters Example
45
The parameters you have changed will remain active as long as the printer is
on. When you turn off the printer, the parameters will be erased from memory
unless you save them in a configuration. If you do not save the configuration,
the printer will revert to the default values next time the printer is powered on.
11. PRINTER CONTROL
Accented Char
12. Accented Char
Standard*
13. Accented Char
Tall Press until the desired parameter displays.
14. Accented Char
Tall* The * indicates this choice is active.
15. ENTER SWITCH
LOCKED Locks the ENTER key.
16. ENTER = Save
ONLINE = No Save Press ENTER to automatically save
configuration changes. Press ONLINE to
continue without saving.
17A. Cfg = 1*
= Power-Up Cfg
Configuration changes have been saved as
Configuration 1, and will be set as the
Power-Up config. The printer will then be
brought online.
17B. ONLINE
Ribbon Life 100%
Places the printer online without
permanently saving the configuration
changes.
18. The printer is ready for operation
Step Press LCD Notes
UNTIL
OR
ENTER
+
ON LINE/CLEAR
ENTER
ON LINE/CLEAR