EVS ENGSoft v1.5 User Guide - Manual (Page 19)

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
19 / 63
10.3 Real mode
In real mode, the source module allows you to browse any supported type of source device. It also allows you to configure
any removable media as a compatible source.
i
There are no registered CANON XF-Series card readers. You have to configure CANON XF-Series CF card readers man-
ually.
Figure 19: Source module (P2 mode)
The combo box in the source module displays the drives that are recognized and
currently connected.
The configure button allows you to configure an unrecognized device.
The 'Select all' button selects all the available media in the current device.
The 'Unselect all' button unselects all of the current device's media at the same
time.
The 'Refresh' button restarts the entire device detection process. It is advisable to
force the detection of devices that have not yet been recognized and to cleanup all
cached information.
The toggle button used to switch to virtual mode.
To browse a medium in the explorer, select a device in the source module's device drop-down list and click on the medium
icon.
Figure 20: Source Module: browsing a P2 medium Figure 21: Source Module: browsing a XDCAM medium