EVS ENGSoft v1.5 User Guide - Manual (Page 13)

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
13 / 63
6.5 Configuring the IPDirector connection
The IPDirector configuration panel can be accessed via the system menu [ Options > Configure IPDirector ].
The “Server” area contains the information required to connect to the IPDirector web service.
l The "Address" field should be filled in with the IP address or the host name of the IPDirector web service server.
l The TCP port is 31016 by default. Unless it is configured otherwise on the server side it should not be modified.
l The field on the far right is the name of the web service access page and should not be modified.
The “Authentication” area contains the login/password to connect to the IPDirector web service. If you do not check the
"Save password" box, you will have to type in your credential again at the next startup of ENGSoft.
Figure 10: IPDirector configuration panel