EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 92)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
83
4. XNet SDTI Network
4.1 OVERVIEW
The XNet network is composed by several servers all connected with a
75-Ohm coaxial cable (BNC). The exchange between systems is operated through
the SDTI interface at 540 or 1485 Mbps.
The XNet network requires a network server dedicated to the management of the
database shared among all servers. This doesn’t require an extra server, but it
has to be assigned to 1 server on the network. If this system disconnects, another
server will automatically take over. These settings can be found in the
Configuration option of the EVS Maintenance menu. For details about the setup of
XNet network, please refer to the XT Tech Ref Hardware manual.
Only servers with HCTX board with SDTI module and SDTI code can be connected
to the XNet network.
The XNet compatibility between versions is detailed in the release notes.