EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 15)

Issue
10.04.B XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
6
C
LIP
E
DIT BY
N
ETWORK
Possible values: Disable (default) / Enable
If this function is enabled, other users on the network can trim, rename, delete,
etc. your clips, or modify the keywords and ranking assigned to your clips. If
disabled, only the local operators can modify or delete clips on the server and edit
their metadata.
2.2.5 C
LIP
M
ANAGEMENT
S
ETTINGS
You can also define most of the Clip management settings on pages 3.1 to 3.3 of
the setup menu on the Remote Panel. You will find a description of these settings
in the Multicam user manual.
D
EFAULT
C
OPY
/M
OVE
The Default Copy/Move parameter allows specifying whether the copy operations
should be executed preferably using the SDTI or the HCTX GigE network.
If the value selected is ‘SDTI’, the copy operations are first executed through the
SDTI network. If the SDTI network is temporarily unavailable, the transfer is then
tried through the HCTX GigE interface. Transfers to GigE targets will always be
performed via the HCTX GigE interface.
If the value selected is ‘GbE’, the copy operations are first executed via the HCTX
GigE interface. If the transfer is not possible (ports not connected, IP address
unknown, no more connection ports are available), the transfer is then tried
through SDTI.
A
UTO
N
AME
C
LIPS
Possible values: Disabled (default) / TC IN / CAM Name / ID Louth / VarID
If this function is enabled, the value of the selected field will automatically be
used to name the clip upon creation.
The values from the following fields can be used to automatically name clips:
Value Meaning
Disabled No name is assigned to a clip when it is created. Default value.
TC IN The timecode of the IN point of the clip is automatically assigned to
a clip when it is created.
CAM
Name The name of the recorder channel is automatically assigned to a clip
when it is created.
ID Louth The ID Louth of the clip, i.e. the unique identifier for the clip on the
XNet network, is assigned to a clip when it is created.
VarID The VarID of the clip is assigned to a clip when it is created. When
this option is selected, the VarID used to assign a name to the clip
will be limited to the first 8 characters of this field.