8 record train settings, 1 auto make clip for cam a, 2 auto make clip for cam b – EVS XSense Version 10.04 - January 2011 Configuration Manual User Manual
Page 55: 3 auto make clip for cam c, 4 auto make clip for cam d, 5 auto make clip for cam e
Issue
10.04.B
XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
46
3.8 RECORD TRAIN SETTINGS
Record Trains p.2.1
[F1]Auto make clip for cam A : Yes
[F2]Auto make clip for cam B : Yes
[F3]Auto make clip for cam C : Yes
[F4]Auto make clip for cam D : Yes
[F5]Auto make clip for cam E : Yes
[F6]Resync to TC ref
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.8.1 A
UTO
M
AKE
C
LIP FOR
CAM
A
Possible values: Yes (default) / No
This function selects the automatic camera creation. When creating clips, the clip
corresponding to the camera on which IN/OUT points have been marked are
always saved. It is possible to save automatically the same action on the other
cameras.
3.8.2 A
UTO
M
AKE
C
LIP FOR
CAM
B
Possible values: Yes (default) / No
Make clip on CAM B even if no IN or OUT point has been marked on this one.
3.8.3 A
UTO
M
AKE
C
LIP FOR
CAM
C
Possible values: Yes (default) / No
Make clip on CAM C even if no IN or OUT point has been marked on this one.
3.8.4 A
UTO
M
AKE
C
LIP FOR
CAM
D
Possible values: Yes (default) / No
Make clip on CAM D even if no IN or OUT point has been marked on this one.
3.8.5 A
UTO
M
AKE
C
LIP FOR
CAM
E
Possible values: Yes (default) / No
Make clip on CAM E even if no IN or OUT point has been marked on this one.