EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 61)

Issue
10.04.B XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
52
3.9.4 C
LIP
P
OST
-R
OLL
Possible range: 00s00fr to 30s00fr. Default: 02s00fr.
When the Post-Roll function is enabled from the secondary clip menu, the clip will
play through its OUT point for a duration defined by the Post-Roll parameter. This
is also valid inside record trains if the Record Train OUTs parameter is set to
“Freeze”.
3.9.5 C
ALL
C
HANNEL
VGA
Possible values: Disable (default) / Enable
This parameter disables or enables the Call Channel function on the VGA Clip
screen. This function allows the operator to select on which PGM channel the clips
called from the keyboard/tablet and VGA should be loaded.
3.9.6 C
LIP
E
DIT BY
N
ETWORK
Possible values: Disable (default) / Enable
If this function is enabled, other users on the network can trim, rename, delete,
etc. your clips, or modify the keywords and ranking assigned to your clips. If
disabled, only the local operators can modify or delete clips on the server and edit
their metadata.
Clips p.3.2
[F1]Keywords file : Football
[F8]Delete
[F2]Keyword Mode : List
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.9.7 K
EYWORDS
F
ILE
Possible values: -------- (default), SERVER, or the name of a keywords file present
on the server.
This parameter specifies the keywords file to use to assign keywords to clips or to
search the clips database:
Value Meaning
-------- No keywords file is selected, and the keyword assignment and
related search functions are not available.
SERVER The keywords file sent by the active network server to all systems
on the network will be used.
Keyword Other file names will appear if keywords files (files with a .KWD
extension) have been loaded in the C:\LSMCE\DATA\KWD directory