EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 64)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
55
select/unselect as PUSH Receive Page.
The selected pages will be highlighted on the LCD and the corresponding F_
keys light red. F_ keys of unselected pages light green.
3. Press ENTER to validate your selection.
Clips p.3.4
[F1]PLST Receive Pg : 1 2 3 4 5 6 7 8 9
[F2]Protocol receive Page : 06
[F3]Default XFile : XFile #31
[F4]Grab image : Disable
[F5]Browse button : Browse
[F6]Reset Archive Status
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.9.13 PLST R
ECEIVE
P
AGE
Possible values: Select one or more clip pages from 1 to 10. Default: Page 10
This function allows the operator to automatically create a local copy of all
network clips when copying a local or network playlist. In this setting, you need to
select the page(s) of your machine where clips received when using the
PLST+CLIPS copy function must be stored. Refer to the description of the Playlist
copy function for details. Clip pages can be assigned simultaneously as PUSH and
PLST Receive Pages.
3.9.14 P
ROTOCOL
R
ECEIVE
P
AGE
Default: Protocol Receive page 6
This setting defines in which page the clips created by protocol are stored. When
a page is full, clips are stored on the next page.
Only clips created on this page (and the other protocol pages if the first page is
full) are visible for protocols.
3.9.15 D
EFAULT
XF
ILE
Value: XFile name and network number. Default: -------- # --
This setting defines the XFile where clips must be sent to when using the
ARCHIVE function from the EVS Remote Panel or VGA screens.