EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 78)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
69
3.15.4 P
ORT
Possible values: Port #2 to Port #6, Lan PC. Default : Port #6
This parameter specifies on which port (RS422 or Lan PC) the commands must be
sent to the hypermotion camera, and possibly to the PGM if you have selected
‘Hypermotion + LSM” in the Remote Mode parameter.
3.15.5 IP
ADDRESS
Possible values: xxx.xxx.xxx.xxx
This parameter specifies the IP address of the PC LAN in case you have selected
the value ‘Lan PC’ for the Port parameter. If you have selected an RS422 port, the
IP address parameter is not relevant, hence not displayed.
3.15.6 D
IAL
S
PEED
Possible values: 010 X to 1000 X
This parameter specifies by which factor the jog speed will be multiplied.