EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 34)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
25
2.7.3 C
ONFLICT WITH
XN
ET DEFINED VALUES
If any of the VarID settings does not correspond to the network defined values set
on the XNet, the server will be disconnected from the network and work in local
mode. In this case, the following happens:
• The setup screen clearly displays the message “!Not XNet common value!” in
yellow next to the incorrect parameter.
• A message is displayed on the SDTI Network Monitoring screen indicating the
incorrect parameter.
2.7.4 V
AR
ID C
ONFIGURATION
F
ILE
The VarID variables have to be set up in a configuration file. The settings are
defined in XML format. The confirmation file, which is named ‘varid.ini, is located
in the C:\LSMCE\DATA.
The file has the following syntax:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; VARID settings
;------------------------------
;Parameter values and [default]
;
; Uniqueness= [Local] or Global
; Length= [32] or 8
; Format= [ASCII] or Binary
; Visibility= [], 1..29,*
; default= empty is converted to local XT Net number
; * for all XNet
;
;------------------------------
Uniqueness=Local
Length=32
Format=ASCII
1=
2=
3=
4=
5=
6=
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;