EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 68)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
59
3.11.5 I
NSERT IN
P
LAYLIST
Possible values: After (default) / Before
This setting defines how the Insert function of playlist will be performed:
depending on the value specified in this setting, the new clip will be inserted after
or before the current clip in the playlist.
3.11.6 C
ONFIRM
I
NS
/D
EL
C
LIP
Possible values: No (default) / Yes
If enabled, a confirmation will be required each time the operator wants to add a
clip to the playlist or remove a clip from the playlist.
Playlist p.4.2
[F1]Split audio editing : Disable
[F2]Extend split transition : End Cut
[F3]Swap audio tracks : Auto
[F4]Playlist loop : No
[F5]Load playlist : Always
[F6]Playlist auto fill : All Cam
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.11.7 S
PLIT
A
UDIO
Possible values: Disable (default) / Enable
This parameter enables or disables the Split Audio Editing option in Play-List
mode. Changing this parameter modifies the display on the output monitors and
adds special function keys on the LCD screen to define different transition points
and durations on the video and audio tracks.
Note
A specific license code (option 112: Playlist Mgmt Advanced) is required
to enable split audio editing.
3.11.8 E
XTEND
S
PLIT
T
RANSITION
Possible values: Center (on) Cut / End (on) Cut / Start (on) Cut / Ask
This parameter determines how the transition should be extended when the
transition duration on the audio or video track only is modified. This parameter is
only useful when performing split audio editing. The following values can be
defined: