Garmin G1000 Piper PA-46 Meridian - Manual (Page 125)

190-00763-01 Rev. A Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian 111
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key (Figures 4-12, 4-13, and 4-14).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the MFD Key and
the FMS Knob on the control unit or select the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-14).
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key on either PFD to transfer the frequency to the COM Active Frequency
Field.
Or
Press the COM Key to select the COM frequency box and then the Frequency Transfer Key on the control unit
to transfer the frequency.
Figure 4-12 Frequency Auto-Tuning from the MFD
Third, Press the ENT Key to Load
a Highlighted Frequency into the
COM Standby Frequency Field
Second, Press the FMS Knob to
Activate the Cursor. Then, Turn to
Scroll Through a List of Frequencies
First, Press the MFD
Key to Activate the
MFD Annunciator
Last, Press the Frequency
Transfer Key to Move the
Frequency to the Active Field
Press the COM Key to Move
the Light Blue Outline to
the COM frequency Box