ZyXEL Communications 662HW Series - Manual (Page 85)

Prestige 662H/HW Series User’s Guide
85 Chapter 6 LAN Setup
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your Prestige’s static DHCP settings, click LAN, then the Static DHCP tab. The
screen appears as shown.
Figure 22 LAN: Static DHCP
The following table describes the labels in this screen.
Table 15 LAN: Static DHCP
LABEL DESCRIPTION
# This is the index number of the Static IP table entry (row).
MAC Address Type the MAC address (with colons) of a computer on your LAN.
IP Address This field specifies the size, or count of the IP address pool.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.